TASKING Blogs
Home TASKING Blogs Fulfilling Requirements for Advanced Automotive Development

Fulfilling Requirements for Advanced Automotive Development

September 12, 2017

Futuristic landscape

Safety-critical software functions required in a car are traditionally placed in separate, single-core Electronic Control Unit (ECU). With this practice, it’s easy to ensure that different functions with potentially different functional safety requirements and Automotive Safety Integrity Level (ASIL) are physically insulated and protected against interference from each other.

Today, it is common to combine many of these single core ECUs into a few multi-core ECUs to save costs on wiring and energy consumption. With this new process, functions with different safety requirements and ASIL levels must coexist on the same ECU where no physical insulation is provided, which presents a whole new set of challenges.

ISO 26262 [5] requires that all software components be developed to the highest ASIL level unless they are partitioned and freedom from interference between the software partitions is established [6]. Unfortunately, these ASIL requirements can be costly. So what can you do to escape these high costs and challenges while still developing high-quality products that meet today’s requirements?

Implementing Software Partitioning and MPUs

To avoid the high costs of moving all software components to the highest ASIL level, many software suppliers have started to use software partitioning and Memory Protection Units (MPUs). The MPU is one of the methods supported by ISO 26262 [6] to establish freedom from interference for memory access and is the most commonly used method today. However, incorrect usage of the MPU can lead to massive financial and legal risks due to critical safety failures in the field. Here are some of the most common pitfalls encountered when using the MPU:

  • MPUs are notoriously hard to configure correctly. Turning on the MPU often triggers many unacceptable MPU access violations (traps) due to small coding and configuration mistakes.

  • Incorrect MPU configurations and coding mistakes triggering MPU traps are hard to eliminate completely by testing and often create substantial costs when not detected until after delivery of your software “in the field” [1,2].

  • Achieving high/full test coverage, especially for exceptional corner cases, is prohibitively expensive [3].

In order to ensure you don’t further complicate development with more issues, it’s important to understand how to effectively diminish the risks described above. But how can you do that?

Mitigating the Risks Associated with MPU Usage

The TASKING Safety Checker tool was developed specifically to mitigate the risks and problems associated with improper MPU usage. It was designed to help reduce the risk of releasing code which triggers MPU traps by up to 95% while also saving 69% of your MPU related testing and bug fixing costs.

Interested in learning more about how the TASKING Safety Checker will help you avoid the commonly encountered risks associated with MPU usage? Download our TASKING Safety Checker Overview Guide today for a step-by-step walkthrough of the tool and a general overview of its key features.

most recent articles

Qualifying a C Library - Dealing with the conflicting worldviews of the ISO 26262 and ISO C standards Functional safety and cybersecurity standards treat the qualification of tools and libraries as independent subjects. This independence is inconsistent with the perspective of the ISO C standard which serves as the foundation for implementing compiler toolsets and their libraries. This fundamental difference poses difficulties when it comes to qualifying a compiler and the libraries associated with it. Introduction To achieve conformance with the Read Article
Qualified C Library Download PDF
Boosting Safety and Efficiency with PPU-Enhanced AURIX™ TC4x Microcontrollers Watch Video
AUTOSAR Timing Analysis with Vector TA Tool Suite and TASKING winIDEA IDE TASKING has maintained a very close and cooperative partnership for many years. A particularly fruitful area of cooperation is focused on creating solutions for AUTOSAR Timing Analysis. Numerous joint research and customer projects result in a user-friendly workflow for advanced timing analysis using the Vector TA Tool Suite, based on hardware trace recordings on Vector MICROSAR-based ECUs. The trace recordings are performed by the TASKING Read Article
SmartCode v10.3r1 Download PDF
winIDEA Debugging Features Accessible in NXP's S32 Design Studio Developing complex embedded systems requires robust tools that optimize the coding, debugging, and testing processes. winIDEA IDE is an Integrated Development Environment (IDE) widely recognized for its comprehensive debugging and testing capabilities. It supports a wide range of microcontrollers and processors, offering features such as real-time data acquisition, advanced breakpoints, and multi-core debugging. NXP's S32 Design Studio (S32DS) is Read Article
winIDEA and AURIX™ Development Studio: The Best Debugging Duo for AURIX Developers Developing complex embedded systems requires robust tools that optimize the coding, debugging, and testing processes. winIDEA IDE is an Integrated Development Environment (IDE) widely recognized for its comprehensive debugging and testing capabilities. It supports a wide range of microcontrollers and processors, offering features such as real-time data acquisition, advanced breakpoints, and multi-core debugging. Infineon’s AURIX™ Development Read Article
TASKING Academy: A Platform for Future Engineers Established in 2017 at TASKING Labs in Slovenia, TASKING Academy offers students from the Faculty of Electrical Engineering and the Faculty of Computer and Information Science a unique opportunity to gain practical experience in their field. Interested students can apply through our website or during the annual JobFair and Career Week events organized by the faculties. The selection process begins with a review of the applicants' CVs, followed by Read Article
Advanced Parallel Tracing with Active Probe Parallel The new TASKING Active Probe Parallel offers a comprehensive solution for debugging a variety of microcontroller architectures. As the name suggests, Active Probe Parallel supports parallel tracing among all other Debugging and Tracing protocols. One of the key advantages of parallel trace is that multiple bits of data are transmitted simultaneously across multiple wires, which: Allows higher data throughput without requiring a very high clock Read Article
TASKING Safety Ecosystem Developing software that complies with functional safety and cybersecurity standards can be a costly endeavor. However, utilizing development tools that are designed to address safety and security requirements, and are well-integrated into the overall automotive system development ecosystem, can help reduce these costs. In this webinar, we will demonstrate how TASKING’s commitment to safety and security enables our customers to achieve compliance Watch Video
Back to Home